Candulor Try-In Resin 1000g A2
£230.25
Backorder only.
Being a biocompatible Class 1 medical device, UCAN Print Try-in is suitable as a base material for the functional try-in of digitally fabricated dentures. This allows dental molds made from the material, such as denture bases that are generatively manufactured with customized tooth setups, to be checked in terms of bite registration and occlusion. The material is available in tooth shade A2. UCAN Print Try-in is characterized by its significantly improved chemical-physical values compared to its competitors (see competition - versus comparable products). Hence, this printing resin is particularly impressive in a direct comparison due to its up to 75% higher impact strength (according to ISO 180/U).
- Enhanced biocompatibility/clinical safety
- Increased impact strength
- Significantly improved chemical physical values
- TPO-free
In stock
SKU
Candulor Try-In Resin 1000g A2
| Specification | Result | Standard |
|---|---|---|
| Shore hardness | 80±5 D | ISO 48-8 |
| Flexural stress | ≥ 80 MPa | ISO 178 |
| Bending module | ≥ 1600 MPa | ISO 178 |
| Flexural strain (at break) MPa |
ca. 9 % | ISO 178 |
| Impact strength | ≥ 20 kJ/m2 | ISO 180 / U |
| Viscosity Pas 23 °C | 1.4 | DIN 53019-1 |
Write Your Own Review